DIY KIT for IN-8-2 Nixie Tubes Clock. Project designed for 6 IN-8-2 Nixie tubes [hours : minutes : seconds]. For that clock You will need one MCU boards NCM107 and one Tubes board NCT482. PCB design, schematic, housing and software made by GRA & AFCH. Kit includes MCU (microcontroller unit) ATmega328p flashed with Arduino Uno Bootloader and sketch (Firmware).Kit compatible with Arduino Uno, so it allows you to write your own unique programs on the Arduino platform, the latest sources are always available on. Github at the "NixeClock" repository. Lot contains bare PCBs and all necessary parts (with Nixie tubes). 1pc of Tubes board: NCT482. 2pcs of neon dot tubes IN-3. Flashed MCU with Arduino bootloader and NixieClock sketch firmware. Set of ALL needed partselectronical, mechanical components and etc. User manual on vintage-style paper. The base listing does NOT contain columns, power supply and Nixie tubes.
The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8, IN-15, IN-16, IN-17. To use this tubes You need appropriate tubes PCB(s).If you have ANY questions. Clock support many kinds of Nixie tubes (6 tubes [hh:mm:ss] format and 4 tubes [hh:mm]). Date format: DD:MM:YY. Unique RGB LEDs backlight with 16,7 millions colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it.
(included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE.
Software based on Arduino sketch, so MCU has Arduino bootloader within. Power On Self Test (POST): LEDs test, tubes test, input voltage test, sound test. Integrated High Voltage Power supply 150 220V. ICSP connector for flashing Arduino Bootloader to blank MCU.3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 millions colors. It can be disabled in the menu (see manual). Test points for testing, adjust and control low and high voltage circuits. Pads for internal buttons and terminals for external buttons. Pads for internal USB connector and terminals for external USB. Terminals for internal and external power connector. Terminals for external and internal buzzer. 2 dots column with separate controls upper and lower dots. Power consumption: 11-14V, 360mA (Recommended power source: voltage 12V, current 1-2A). MCU board NCM107 has world smallest size: 100mmx50mm.
Tubes board NCT482 size: 200mmx50mm. The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IV-8, IN-7, IN-1, IN-2, IN-4, IN-8, IN-15, IN-16, IN-17 in case if you build your own Tube boards.
MCU NCM107 bare board (top). MCU NCM107 bare board (bottom). Assembled MCU board top side chart.
Assembled MCU board bottom side. Tubes board NCT482 assembled PCB Top view. Tubes board NCT482 assembled PCB Bottom view. NCM105 board assembling process (part 1/2). Boards Dimensions in 2D and 3D.MCU board NCM107 PCB Top view. MCU board NCM107 PCB Bottom. Tubes board NCT482 in 3D. Dimensions of NCM107 in 2D. MCU Assembled PCB Top side.
MCU Assembled PCB Bottom side. Example of assembled Nixie tubes clock on IN-8-2 tubes without columns.
The item "Nixie Tubes Clock N-8-2 DIY KIT PCBs+ALL Parts Slot Machine 12/24H WITH TUBES" is in sale since Wednesday, October 26, 2016. This item is in the category "Home & Garden\Home Décor\Clocks\Alarm Clocks & Clock Radios". The seller is "gra_and_afch_2" and is located in Dnipropetrovsk. This item can be shipped worldwide.